Installation Manual
Keynetics SentriKey® Installation Manual 2019 v3
5
Step
Instructions
Illustration
Open and disassemble Lockbox
6.
a)
Open the Lockbox.
b)
Carefully note the interconnect cable routing and
position before proceeding. The cable must be routed
in exactly this manner when reassembling the Lockbox
later.
c)
Remove the light grey Key Tray and set aside for re-
assembly.
Lockboxes with mechanical door stops
Remove the two #6-32 X .250 LG. BUTTON HEAD,TORX
(T1O) screws located on the bottom of the lockbox that
attach the door rotation limiter. Save these parts for later
reassembly.
7.
a)
Using a T20 Torx screw driver, remove the single center
fastener bolt that retains the metal Security Plate and
Latching Mechanism.
b)
Set aside for re-assembly.
8.
a)
Carefully remove the metal Security Plate. Use a flat
blade screwdriver if necessary.
b)
Set aside for re-assembly.
