KeyLinkOnline.com
Step 1:
Cut two 2'' x (8'' or 10'') boards to
fit between joists. These should be fastened
together with four wood decking screws
Step 3:
Fasten each side using three wood
deck screws on the bottom board, use four
screws on the lower board for the front.
Step 4:
Measure and mark holes for the Post
Mount, specific to your post size. Use
7/16
" drill bit
with a shank at least 5.5" long. Keep power drill
straight while drilling.
Step 5:
Place leveling plate between post and
mounting surface. Using 3/16" Allen wrench, turn
set screws to level post. Use 3/8" x 5.5" Hex Head
Bolts to fasten post to decking.
Outer Rim
Joist
Step 2:
Place fastened boards abutting the
inside face of the outer rim joist, and flush with
the underside of the deck boards.
Outer Rim
Joist
Outer Rim
Joist
Step 6:
Place the Under Deck Bracket over the bolt
ends, parrallel to outer rim joist as shown, and fasten
using a standard washer followed by a hex nut.
NOTE: For Corner & End Posts 2 Under Deck Brackets
are required as shown
*In order to qualify for concentrated load safety specifications; Post Mounts must be installed exactly as specified.
KFRIG200303
Line Post
Corner/End Post