Seite 6
8. Programming
Programming is based entirely on the Main Menu and Function Menu.
All programming must start from the programming position and can
only be executed by those who have access to the service code. To
enter the programming position the operator has to input the relevant
service code. On delivery from the factory this is 301042#.
In programming position; select the required option in the main menu
and then select the required option in the function menu. After
programming, or to change to another menu, press 0 to return to the
previous position. As long as you are working in the same menu, for
example entering codes, you don’t need to return to start position after
each programming. All examples below are based on the operator
being in programming position to then select the required option in the
main menu.
8.1 Codes
New Code
•
Enter current service code and press #
•
Enter 1 = CODES
•
Enter 1 = NEW CODE
•
Enter code (1-7 characters) and press #
•
Enter compartment no. and press # twice. NB! If more
compartments are required press # once and then select the next
compartment for which you want the code to apply. On completion,
finish off with #.
•
Enter name (1-12 characters) and press #.
•
Enter how many times the code is to apply. NB! This is an option. If
you want the code to apply once, enter 1 then #. If the code is to
always apply don’t enter anything and proceed by pressing #.
•
Enter start date. NB! This is if you want the code to be activated on
a particular date. To use this func- tion you must also specify end
date, start time and end time. If this is not required press # to
proceed.
•
Enter end date and press #. NB! This is if you want the code to be
deactivated on a particular date. To use this function you must also
specify start date, start time and end time. If this is not required
press # to proceed.
