Seite 11
Press # to start. All doors in the system will now open and close after
each other.
TIP:
It is a good idea to use this function when new cabinets are
installed in the system. All doors are then tested and you know that the
system is correctly installed.
9 - Open cabinet with user code
To open a cabinet simply enter the user code followed by #.
10 - Reset - Factory settings
To return to factory settings. All previous programming will be deleted.
Press # to confirm.
If you have forgotten the service code you need to make a total reset
of the cabinet.
1. Turn off the power to the cabinet, battery back up as well if the
cabinet has one.
2. Press * and # on the keypad and turn the power on again.
3. When the display is starting up, the cabinet is in factory mode and
you can now start over the programming with the service code,
301042#
9. Technical data
Mains voltage:
230 V, 50 Hz
Usage:
Stand-By: 0.5 W
Working: 12 W
CPU:
Microprocessor
Meomory:
EEPROM, Codes remain in the event of a
power failure.
Lock:
Electron magnet 12V, 1A
Material:
Steel plate 1.5 mm
Surface:
Galvanized sheet metal, powder coated
Size:
HxWxD: 280 x 350 x 93 cm
Weight:
Approx. 6,0 kg
