KEYBOARDPARTNER HX3 MIDI Expander User Manual Download Page 2

Page: 2 / 26

2 HX3 MIDI Expander

Please read this manual carefully before using the HX3 Expander.

Only use appropriate power supply as advised. Input voltages exceeding
15V may damage the device.

Designed for indoor use only. Do not use HX3 Expander in moist places.
Do not spill liquids or solvents into unit.

No user-serviceable parts inside. Refer to qualified technician or service
representative if problems occur.

Only clean with damp soft cloth. Using detergents or solvents may
deteriorate finish and lettering.

Keep packaging in case of service shipment.

EU conformity declaration

The producer/distributor

Entwicklung elektronischer Musikinstrumente
Carsten Meyer
Ithweg 37, D-30851 Langenhagen
[email protected]

hereby declares, that the product

HX3 MIDI Expander

has been designed, produced and examined in compliance with the DIN VDE 0580 standard and in
accordance with the EU Low Voltage Directive.

Following directives, standards and guidelines have been used:

EMV-Richtlinie 2014/30/EU
Niederspannungsrichtlinie 2014/35 EU

RoHS-Richtlinie 2011/65/EU

Langenhagen, July 2020

____________________________
Carsten Meyer / Geschäftsführer

Summary of Contents for HX3 MIDI Expander



























Search results

Summary of Contents for HX3 MIDI Expander

Reviews:

Related manuals for HX3 MIDI Expander

Brands by name

Popular brands

KEYBOARDPARTNER HX3 MIDI Expander, User Manual

Search results

Summary of Contents for HX3 MIDI Expander

Reviews:

Related manuals for HX3 MIDI Expander

Brands by name

Popular brands