background image

 

 

How do I copy a stored preset to another preset? 

Press the rotary knob twice to navigate to the preset/drawbar menu. Keep the button pressed until 
“Save Preset #XX to #XX” appears on the display. (“XX” representing the current preset number 
and the target preset number, respectively). Turn the rotary knob to select the target preset 
number. Press the rotary knob until 

“Saved to Preset #XX” appears on the display.

 

How do I access the General MIDI instruments? 

In the menu, select the voice for the manual you wish to assign a GM instrument to. Turn the 
encoder knob to select a voice number in the range of 

16…39. These are the available GM voices, 

which may be preassigned using the HX3.5 Editor. You may store the selected GM voice as 
preset just like the drawbar settings. However, the GM voice will retain its voice number. 

How do I store my TubeAmpGain setting as preset? 

You may store the TubeAmpGain setting as well as any other effect parameters as part of the 
active preset by simply keeping the rotary encoder knob pressed until 

“Saved to Preset #XX” 

appears on the display. 

(“XX” representing the current preset number). However, Rotary Motor 

ON/OFF and Rotary FAST ON/OFF are always live and not part of a preset. 

 

In which way does the live preset 0 differ from other presets? 

Traditionally, the live preset 0 is not a real preset, but instead applies the current 

“live” settings of 

the drawbars and control switches. This is also true for the HX3 Drawbar Expander that is 
controlled by an external keyboard via MIDI. If you select a preset different from 0, your live 
settings will remain stored. If you return to preset 0, the live settings will be recalled and the 
current drawbar settings will be applied. In addition to that, the HX3.5 preset 0 preserves other 
parameter settings, which are cannot be set 

“live” by drawbars or other controls. It also determines 

the power-up settings.

 

 
 
 
 
 
 
KEYBOARDPARTNER UG 

Entwicklung elektronischer Musikinstrumente 
Carsten Meyer, Ithweg 37, D-30851 Langenhagen 
Web: www.keyboardpartner.de    Instructions: wiki.keyboardpartner.de 
EMail: 

[email protected]

 

 
 
All information given herein is given to describe certain components and shall not be considered 
as a guarantee of characteristics. Rights to technical changes reserved.

 

Summary of Contents for HX3 Drawbar Expander Version 5












Reviews: