11
10
Name and Use of Each Part
For crushing of concrete.
For tamping, grooving, cutting, removing, squaring, grooving in a gravel road.
[Examples]
Heating & cooling work, pipe, wiring work, sanitary facilities work, installation of machinery, supply &
drainage works, interior decoration work, harbor facilities work and other engineering facilities works.
2. Use
1. Name of each parts
How to install, remove and operate
Switch
Side handle
Front cover
Name plate Cap cover
Bull point
Front cover set screw
Stopper lever
Grease cover
Switch
Switch
Grease cover
Handle
Retainer
Retainer
Side handle
Safety cover
Handle
Selector
Side handle
Safety cover
Alawys be sure that the tool is switched off and unplugged before installing or
removing the bit.
•KH-42HA•
•KH-42MA•
•KH-6500•
1. Installing and removing bull
1) KH-42HA, KH-42MA
KH-42MA is suitable for insert tools with SDS-MAX shank. KH-42HA has the tool
holder system of hexagon.
Before installing the bit, clean the bit shank and apply the bit grease provided to it.
Installing
Insert the bit into tool holder with rotating it. After installing, always make sure that the
bit is securely held in place by trying to pull it out.
Removing
Pull the retainer in the direction of the arraw(illustrated), and pull the bit out.
2) KH-6500
(1) Pull the stopper lever in the direction of the arrow mark(B)
(2) Turn the stopper lever a full 180 degrees to set the bull point.
(3) Insert the bull point in the direction of the arrow mark(A) into the front cover.
(4) Pull and turn the stopper lever a full 180 degrees in its original position.
(A)
(B)
Stopper lever
Front cover
Removing
Installing
Retainer
