Throughput
• There is one (1) Output
Throughput
:
-
1 x S-Video jack for S-Video analog video
-
1 x RCA jack for Composite Video (CV) analog video
-
2 x RCA jacks for audio:
-
standard line-type Left & Right analog pairs
-
or use one jack for digital PCM audio
-
Power supply connector, to feed power to the daisy-chained units [NOTE:
when daisy-chaining, you MUST use a 5 Volt, 5-Amp rated supply, available
from Key Digital
, as the external power supply for the first unit in the daisy
chain]
• The
Throughput
can be used as follows:
Can daisy-chain the input to another device via the
Throughput
Throughput
Output can also serve as a ninth DA output
Signal Properties:
• Analog Video
-
NTSC, PAL, SECAM, all world analog SD formats
-
Composite Video (CV), and
-
S-Video
-
Bandwidth flat out to 110 MHz
• Audio
-
Bandwidth flat 20 Hz to 50 MHz
-
Analog (standard line-type Left & Right pairs), or
-
Digital PCM on Left or Right
• Can drive CV (Composite Video) and S-Video cables, up to 300 feet each
Connectors
• Each Input (1 Input Group), Output (8 separate Output Groups), and
Throughput
(1 Output
Throughput
Group) consists of:
-
1 x S-Video jack for S-Video analog video input
-
1 x color-coded RCA female jack for Composite Video (CV) analog video input
-
2 x color-coded RCA female jacks for audio input:
-
standard line-type Left & Right analog pairs
-
or use one jack for digital PCM audio
• Other Connections:
-
Standard power plug for external power supply input and throughput power
supply feed-forward output
Mechanical
• Easy to install and integrate — Custom Installer’s dream
• Cables attach to the I/O A/V panel
• Stand-alone or can be mounted with flanges (included)
• Size: 3” x 11.375” x 2.375” high
• Weight: 2.8 lbs.
• Enclosure type: Metal (no vents)
• Input Power: 5 Volt DC (external supply included, 110-240V AC, 50-60 Hz, 1.0 A)
NOTE: use a 5.0 A supply available from Key Digital
, as the external power supply
when daisy-chaining
SD VIEW 8
OP E R AT ING IN S T R U C T ION S
ModeKD-SCDA8
Page 7
