11
Basic Operation of the KD-VPHD4X1 Switcher &
Processor
Now that you have connected your A/V equipment and the power supply to the KD-
VPHD4X1 Switcher & Processor, you are ready to operate and control the unit.
Be sure that your KD-VPHD4X1 Switcher & Processor is set to “Normal” operating mode, as
instructed in the prior Step in this Operating Manual:
Whenever power is supplied to your KD-VPHD4X1 Switcher & Processor unit and your unit is
“turned OFF,” the unit is actually in “Standby” mode. To change operating Modes, power
must NOT be applied to your KD-VPHD4X1 Switcher & Processor unit. The power supply
MUST be disconnected (either from the back of your unit or from the wall outlet) to have a
complete power shutdown - reset. Be sure the rear-panel Mode slide switch is set to
“Normal” mode. (Only select “Program” mode when you need to perform a firmware upgrade
of your KD-VPHD4X1 Switcher & Processor unit, as provided and instructed by Key Digital
®
.)
Controlling your KD-VPHD4X1 Switcher & Processor unit:
Your KD-VPHD4X1 Switcher & Processor is easy to control and operate, and you have several
convenient options for controlling your KD-VPHD4X1 Switcher & Processor. All controls are
available via:
■
Front-panel pushbuttons, with a handy LCD display for instant feedback. The pushbuttons
act to “cycle” through operations, and you can navigate with the Up, Down, Left, and Right
arrows. The LCD will display the current function.
To use the front-panel pushbuttons and LCD:
■
The LEFT and RIGHT arrow pushbuttons allow you to scroll through the different
“menus”
■
The UP and DOWN arrow pushbuttons allow you to scroll through the different
“options” or selections, for the given menu
■
The Select pushbutton allows you to invoke the Menu or Option selection
■
The Input Select pushbutton allows for convenient front-panel selection of which
1-of-4 Inputs to switch to the Output
Summary of Contents for KD-VPHD4X1
Page 19: ...19 ...
