KD-MSW4x2Pro Operating Instructions
Page 0
KD-MSW4x2Pro Operating Instructions
Page
What’s Included
The following contents are provided in the carton:
One KD-MSW4x2Pro unit
1
Separate external 6-Volt power supply
IR remote control with batteries included
RS-232 cable
2
(not provided with the base KD-MSW4x2Pro unit stand-alone)
Operating Manual (Instructions)
Warranty card
The KD-MSW4x2Pro operating Manual
The successful system integration and operation of the KD-MSW4x2Pro 4-to-2 HDTV Matrix
Switcher is very important to us at Key Digital
™
. Please follow all of the instructions provided here
to ensure proper operation of the product. Contact Key Digital
™
immediately if any difficulties are
incurred (see the end of this Operating Manual for contact information).
1 These Operating Instructions apply to the entire Fat Boy Series line of expandable KD-MSW4x2Pro HDTV matrix
switchers. The number of units provided in the package depends on the configuration purchased (see the cover of
this Operating Manual for details). A Cable Kit has already been installed and tested that interconnects the multiple
units, and should not be altered.
2 The RS-232 cable is ONLY PROVIDED FOR FAT BOY EXPANSION. The RS-232 cable is NOT provided with the
purchase of only a base KD-MSW4x2Pro base unit.
1.
2.
3.
4.
5.
6.
CAuTIon: When installing the KD-MSW4x2Pro unit, make all
video and audio hookups and connections before plugging in
the external power supply (provided). Do noT apply power to
the unit until all video and audio connections have been made
to the KD-MSW4x2Pro unit from the “source” devices and to
the output displays and/or audio systems.
use only the external power supply provided with the
KD-MSW4x2Pro unit or you VoID the Key Digital
™
Warranty
and may potentially damage to the unit and associated
Convenient front-panel LED indicatiors display the selecte input,
for each of the two outputs
The KD-MSW4x2Pro allows the matrix-switched input/output combinations to be configured via
the front panel pushbuttons, with the user’s input selection displayed by front-panel LED indicators
for each of the two outputs. Switching can be accomplished conveniently in any of three ways:
Manually, using the front panel pushbuttons that cycle through the four inputs
Remotely, using the supplied IR remote control
A rear-panel IR Extender is also provided
A rear-panel wired IR is also provided
Using the RS-232 control, the unit is compatible with all Control Systems
Regardless of how the unit is controlled, the user’s input selection is confirmed on the front-panel
LED indicators for each of the two outputs.
›
›
➔
➔
›
Inputs
Outputs
Power Supply
Wired IR
IR Extender
RS-232
1
2
1
2
3
4
Pushbutton to Select Input
Input Selected LEDs
Separate control & LEDs for each output
IR Remote Sensor
MSW4x2Pro_Manual.indd 10-11
8/23/06 4:10:13 PM
