KD-MSW4x2Pro Operating Instructions
Page
KD-MSW4x2Pro Operating Instructions
Page
Connecting the Video and Audio Inputs and outputs
Decide on a safe location to place or mount the KD-MSW4x2Pro. Provide enough space for
sufficient airflow and ventilation, especially if the unit is left “On” most of the time.
Connecting A/V Equipment
Connecting A/V equipment to the KD-MSW4x2Pro HDTV Matrix Switcher is straightforward and
easily accomplished via the ergonomic rear panel connector array. Because not all consumer
equipment marketed today uses BNC connector interfaces, it may be necessary to employ adapter
plugs and/or cable assemblies to interface these various devices to the unit.
The video signal format must be considered when making connections to the KD-MSW4x2Pro
unit. Simply match the A/V device’s output (namely YPbPr “Component” or RGBHV “VGA” video)
to a similar video signal output configuration on the KD-MSW4x2Pro. S-Video and/or composite
video may also be interfaced with the unit, using appropriate adapters available separately.
The same consideration applies to the audio interfaces. Both analog and digital audio output
options are provided on the KD-MSW4x2Pro. Use the appropriate format, such as analog audio
when connecting directly to the audio inputs of a video monitor; or digital audio, when connecting
instead to an A/V receiver having coaxial digital (PCM) interfaces for decoding surround sound
signals.
Do not connect the external supply (provided) to the back
of the KD-MSW4x2Pro unit until ALL of your video and audio
connections are completed.
Test for proper operation of the unit, interconnections, and cables before
final installation of cables behind walls or ceilings. The output stage of the
KD-MSW4x2Pro is capable of driving high-quality, equal-length video cables up
to 300’ or more.
CAuTIon: For proper operation of the high quality electrical circuits in
the KD-MSW4x2Pro unit, do noT "daisy chain" inputs:
Each input of the KD-MSW4x2Pro has its own 75
Ω
termination
Do noT feel a source to multiple KD-MSW4x2Pro inputs without
proper distribution equipment
➔
➔
CAuTIon: The output stage of the KD-MSW4x2Pro can drive high-
quality length video cables up to 300' or more. Be sure to use high-
quality cables like those available through Key Digital
™
. Always ensure
cables for each output are equal in length for each video component.
CAuTIon: Connecting digital PCM audio signals directly to the analog
audio input of a TV monitor, display, or other device can result in
severe damage to its speakers.
The 4 Input Ports and the 2 output Ports are Configured Identically
The Port configurations are the same for the 4 Input Ports and the 2 Output Ports. Each Port is
comprised of six (6) BNC connectors:
Connect up to four video and audio sources to the BNC connector Input Ports of the
KD-MSW4x2Pro:
Digital PCM audio is available with either YPbPr or RGBHV video
Analog stereo audio is available with YPbPr video but not RGBHV video, unless the sync is on
green (G)
Connect up to two displays to the BNC jack Output Ports of the KD-MSW4x2Pro. The audio
outputs from the product can be connected to the audio inputs of the display, or separate
surround sound or other audio systems.
Fat Boy expansions:
If purchased as a Fat Boy expansion, connect the appropriate number of outputs to all of the
pre-wired units.
›
➔
➔
›
›
➔
Video
Audio
Component Video Applications
Inputs and Outputs
RGBHV Video Applications
Inputs and Outputs
Pr
Y
Pb
Left (L)
Right (R) Digital
PCM
R
G
B
H
V
Digital
PCM
Component Video
RGBHV Video
Analog
Stereo
Audio
Digital
Audio
Digital
Audio
If video sync is
on Green (G), then
Analog Stereo Audio
is also supported
here in place of H&V
Note: The left and right analog stereo audio interfaces also double as the horizontal and vertical sync signals
(respectively) for the RGB video interface.
MSW4x2Pro_Manual.indd 16-17
8/23/06 4:10:23 PM
