4
5
Setup of Rx unit
Connections
All connections to the KD-IP1080 are found on the rear panel of the unit. Refer to the
illustrations below for port assignments while making connections.
KD-IP1080 Tx Unit - Back Panel Operation
A. Input Connections
›
HDMI Input
»
Compatible with DVI1.0/HDMI1.3b/HDCP1.x
»
Video Resolution supports up to 1080p@60 (2.25Gbps)
»
Audio format support up to 2ch PCM at 44.1/48kHz
»
Active link (Blue LED) illuminated when active HDMI/DVI Signal is present
»
Does not support CEC
B. Output Connections
›
HDMI Pass-through
»
Compatible with DVI1.0/HDMI1.3b/HDCP1.x
»
Video Resolution supports up to 1080p@60 (2.25Gbps)
»
Audio format support up to 2ch PCM at 44.1/48kHz
»
Active link (Blue LED) illuminated when HPD signal is present from display
»
Does not support CEC
›
Ethernet
»
Compatible with CAT5e/6 UTP/STP cable
»
Supports up to 400ft extension over CAT5e/6 UTP/STP cable
»
Video Resolution supports up to 1080p@60 (2.25Gbps)
»
Audio format support up to 2ch PCM at 44.1/48kHz
»
A/V Stream Bitrate is up to 15Mbps
C. Power Port
»
KD-PS5V2ASC 5V/2A Power Supply with Screw Plug
»
Acts as backup power connection for POE model
KD-IP1080 Tx Unit - Front Panel Operation
A. LED Light
›
IP Link
»
Active link (Blue LED) illuminated when Tx Unit is connected to Smart Managed Switch
and A/V stream data is transmitting
B. Factory reset
›
Reset
»
Push Button. When pressed and held for 3 seconds, unit will factory reset with
IP address at 192.168.1.101
