manualshive.com logo in svg

Key Digital KD-HDMS10X6, Setup Manual, Page: 16 / 20

Share
Download
Key Digital KD-HDMS10X6 Setup Manual Download Page 16

Page 16

Specifications

 

»

Video Input Interface (HDMI Input Card):

 Has both HDMI and CAT5 (RJ45) Inputs, only 1 

of these Inputs can be selected per Input card

 

»

Supports HDMI 1.3a and 3D Feature of HDMI1.4

 

»

CAT5(RJ45) works only with KD-BBTX Balun and HDMI with KD-CATHD(TX) Baluns.

 

»

Video Output Interface (HDMI Output Card):

 

»

Features both HDMI and CAT5(RJ45) outputs, and provides both simultaneously.

 

»

Supports HDMI 1.3a and 3D Ready, 4K Resolution Support features of HDMI1.4

 

»

CAT5(RJ45) works only with KD-BBRX Balun and HDMI with KD-CATHD(RX) Baluns..

 

»

Audio Input Interface (HDMI Input Card):

 

»

Supports both PCM and Analog Stereo Audio inputs. The PCM Input shares the same 
RCA connector as Left Analog stereo and only one of these audio inputs / formats can 
be selected at a time.

 

»

The Analog Stereo Audio input is processed at 48kHz sampling rate.

 

»

Audio Output Interface (HDMI Output Card):

 

 

»

Supports both PCM and Analog Stereo Audio Outputs. The PCM Output shares the 
same RCA connector as Left Analog stereo and only one of these audio outputs / format 
types can be selected at a time.

 

»

1.  When the PCM Output is selected and its source is from the external PCM Input, PCM 

(at 48 kHz) will be in bypass mode to pass Dolby Digital, DTS, or 2Ch PCM and will be 
without audio control.

 

»

2.  The Analog Stereo Audio Input is processed (at 48 kHz) and will be converted to 

digital audio at the PCM Output if desired. Full audio control will be available in this case.

 

»

3.  When HD Audio (HD-Dolby Digital, HD-DTS etc.) or multi-channel PCM is carried 

by HDMI, it will be muted at the PCM Output if HDMI is selected as the audio input 
source.

 

»

Control Interface (HDMI Input/Output Card):

 

»

Supports both RS-232(up to 115200bps) and Serial IR and shares the same stereo mini-
jack. Only one control protocol can be selected through control port settings.

 

»

RS-232 and Serial IR support bi-directional paths. Output signal level is +5V TTL and 
has +/-12V tolerance.

 

»

Control Interface (Power Board):

 

»

Supports one RS-232(DB9), one TCP/IP(RJ45), one USB(B Type) for service only 
(software upgrade), one Serial IR and one IR Eye.

 

»

RS-232 baud rate for control of unit is fixed at 57,600bps.

 

»

RS-232 and TCP/IP share same control commands.

 

»

Serial IR supports bi-directional path. Output signal level is +5V TTL with +/-12V 
tolerance.

 

»

IR Eye is only for Remote IR receiving sensor.

Summary of Contents for KD-HDMS10X6





















Reviews:

No comments