Key Digital Champion KD-16x16CS, Operating Instructions Manual

Page: 5 / 8

6 7
yy#. Set Output to pass-thru / respective Input.
Output 03 select Input 03
All#. Set All Output to pass-thru / respective Input.
Output 01 select Input 01, Output 02 select Input 02 …
Output 24 select Input 24
yy$. Set Output OFF (no video and audio).
Output 04 set OFF.
All$. Set All Output OFF
SaveN. Store current matrix switch setting into the memory [N],
N = 1 ~ 8
Ex: Save1.
RecallN. Recall the matrix switch setting from the memory [N] ,
N = 1 ~ 8
Ex: Recall1.
Note: Recalling a cleared/empty preset will turn off all outpus.
ClearN. Clear the memory [N] by default setting, N = 1 ~ 8
Ex: Clear1.
/%Lock; Set Front Panel Buttons Disable
/%Unlock; Set Front Panel Buttons Enable
/:BellOff; Set the Bell Off
/:BellOn; Set the Bell On
/:MessageOff; Set the Return Message Off at both RS232 and TCP/IP
Note: Status command will be unresponsive
/:MessageOn; Set the Return Message On at both RS232 and TCP/IP
EDID Setup
RWEDID.
Copy EDID from Output 01 to All Inputs
DefaultEDID. Copy Default EDID (1080p@60, 2CH PCM) to All Inputs
Network Setup
<#SIPRxxx.xxx.xxx.xxx> Set IP Address xxx.xxx.xxx.xxx at TCP/IP Network Setting,
xxx = 000 ~ 255
Ex: <#SIPR192.168.000.239>
<#SUBRxxx.xxx.xxx.xxx> Set Net Mask xxx.xxx.xxx.xxx at TCP/IP Network Setting,
xxx = 000 ~ 255
Ex: <#SUBR255.255.255.000>
<#GARxxx.xxx.xxx.xxx>
Set Router Address xxx.xxx.xxx.xxx at TCP/IP Network
Setting, xxx = 000 ~ 255
Ex: <#GAR192.168.000.001>
<#SPORTzzzz> Set TCP Port zzzz at TCP/IP Network Setting,
zzzz = 0001 ~ 9999
Ex: <#SPORT0023>
Status/System Commands
/^Version; Get the F/W version of matrix switcher
Statusyy. Get Video Output yy Status, yy = 01 ~ 32 (Max.)
Ex: Status01.
Status. Get All Video Output Status
<^SIPR> Get IP Address at TCP/IP Network Setting
<^SUBR> Get Net Mask at TCP/IP Network Setting,
<^GAR> Get Route Address at TCP/IP Network Setting,
<^SPORT> Get TCP Port at TCP/IP Network Setting,
<^SHAR> Get MAC Address at TCP/IP Network Setting,
Video Switching
‘xxByy.’ : To switch the desired video input (xx) to the desired output (yy)
»
xx= the input number (00-16; 00=off)
»
yy= the output number (00-16; 00=off)
»
Example: To switch input 03 to output 01, issue the command: ‘03B01.’
‘xxAll.’ : To switch all outputs to a desired input
»
Example: To switch all outputs to input 3, issue the command: ‘03All.’
»
To turn OFF output 05, issue the command: ‘00B05.’
EDID Commands
‘DefaultEDID.’
: Will copy the default 1080p, 2ch PCM EDID to all inputs
‘RWEDID. ’: Will copy EDID from output 1 to all inputs
Status
‘Status.’ : Get all video output status
‘Statusyy.’ : Get status of output yy
»
yy= the output number (01-16)
»
Example: To get the status of output 2, issue the command: ‘Status02.’
RS-232 and TCP-IP Status Response:
A: 01
➔
001
V: 01
➔
001
A: 02
➔
002
V: 02
➔
002
A: 03
➔
003
V: 03
➔
003
A: 04
➔
004
V: 04
➔
004
A: 05
➔
005
V: 05
➔
005
A: 06
➔
006
V: 06
➔
006
A: 07
➔
007
V: 07
➔
007
A: 08
➔
008
V: 08
➔
008
A: 09
➔
009
V: 09
➔
009
A: 10
➔
010
V: 10
➔
010
A: 11
➔
011
V: 11
➔
011
A: 12
➔
012
V: 12
➔
012
A: 13
➔
013
V: 13
➔
013
A: 14
➔
014
V: 14
➔
014
A: 15
➔
015
V: 15
➔
015
A: 16
➔
016
V: 16
➔
016