16
ENGLISH
CONNECTOR CN5
25) ANT
Antenna connection (signal)
26) ANT
Antenna connection (braid)
27) CH2
2nd radio channel connection (only if the 2 channel snap-in receiver is used)
28) CH2
2nd radio channel connection (only if the 2 channel snap-in receiver is used)
Antenna
CONNECTOR CN6
33) BAT+
Connection positive battery charger
34) BAT-
Connection negative battery charger
Built-in current controlled recharge circuit with backup operation, electronically protected against
short circuits for use it connect 2 batteries in series 12Vdc max.7Ah
35) 24V+
Connection of accessory power supply 24Vac 300mA max
36) 24V-
Connection of accessory power supply 24Vac 300mA max
CONNECTOR CN7
29) +
Positive power supply of the encoders
30) ENC1 M1
Signal of the encoder for motor M1
31) ENC2 M2
Signal of the encoder for motor M2
32) -
Negative power supply of the encoders
The electronic brake is always active in both operating directions, when it intervenes the operation
reverses for both doors for 2 seconds then the movement is stopped for 1 second then it continues
motion in the direction opposite of the obstacle; if it intervenes three consecutive times, the entire
system will STOP, deactivating the automatic closure if necessary, making it necessary for the user
to provide a start impulse, upon which the control unit will perform a realignment when opening,
showing EM on the display.
CONNECTOR JP1
Connector for radio receiver mod:
900RXI-42, 900RXI-42R, 900RXI-22
M1/M2 +
M1
M2
M1/M2 -
PS300-24
PS400-24
INT-24
black
green/yellow green/yellow
grey
PS-200
brown
green
green
white
SN50-24
red
green
green
white
