12 Servicing
27
13 Case and
strap assembly
If this tester should fail to operate correctly, return it to Kewtech stating
the exact nature of the fault. Before returning the instrument ensure that:
1
The leads have been checked for continuity and signs of damage.
2
The continuity mode fuse (situated in the battery compartment)
has been checked.
3
The batteries are in good condition.
Please remember to give all the information possible concerning
the nature of the fault, as this will mean that the instrument will
be serviced and returned to you more quickly.
Return the instrument to:
Service Department
Kewtech Corporation Limited
76 St. Catherine’s Grove
Lincoln LN5 8NA
Regular re-calibration is recommended for this instrument. Kewtech
recommends that with normal use, the instrument be calibrated at least
once in every 12 month interval. When the instrument is due for re-
calibration return it to the address above marked for the attention of the
Calibration Department and be sure to include all accessory leads, as these
are part of the calibration procedure.
Correct assembly is shown below. By hanging the instrument round the
neck, both hands will be left free for testing.
