Product Image
Quick Start:
1.Fully charge the battery case with earbuds inside before you use it. The battery case will be fully
charged when you can see four blue LEDs glowing inside the case.
2.For the first connection to your device, please remove both earbuds at the same time. If you
remove only one, you may find your earbuds will enter mono mode. If this happens, place both
earbuds back in the case and remove together.
3.If mono mode continues
restore into factory mode. For details, please read “restore to factory
mode” in this manual.
Operation:
1. Power on
：
Auto power on:
Take the earbuds out the case to auto power on. The blue light will flash three times and
you will hear
“Power on”
.
Power on by hand:
If earbuds are taken out without connecting, they will turn off automatically after 5
minutes. Long press the centre button for 3 seconds. The blue light will flash three times and you will hear
the
’Power on”
.
2. Connect to mobile phone:
Remove the earbuds from the case. The left earbud indicator light will
change to flash blue and red alternately. Now the earbuds are ready to pair to a device. Locate the earbuds
name in your device under “Setting
→
Bluetooth
→
New search/ Other Devices
→
“Kew
Labs -
KTW1”. Click
to connect. The left earbud indicator light color will change to blue and you will
hear “Connected”.
Charging case
Charging case
battery life
indicator
Red :Earbuds
Charging
Blue: Fully
charged
