28
29
STOPPING THE BREW PROCESS
WATER FILTER ALERT
ADDING WATER
BREWER ALERTS
FOR K-CUP
®
PODS AND K-CARAFE
™
PODS (KEURIG BREW
™
SETTING 1)
To stop the brewing process, press and hold the Power button for one second.
Remove and dispose of any used pod. Brewing a used pod is not recommended.
Your Keurig
®
Plus Series brewer will indicate when the water level in the Water Reservoir is
low and you will not be able to brew. The brewer will only indicate “More Water Please.” if
there is not enough to complete your brew.
For example:
A Keurig
™
Carafe will require more water than a 10 ounce mug.
Your brewer is designed to deliver the perfect cup time after time, year after year. To keep
it working at peak performance, your Keurig
®
Plus Series brewer will let you know when it
needs a little attention.
TIME TO REPLACE THE KEURIG
™
WATER FILTER (VISIT KEURIG.CA TO PURCHASE)
Your brewer will indicate “Time to replace the Water Filter.” after every 1,000 ounces
or two months. Once you’ve replaced the Keurig
™
Water Filter, press YES to reset the
WATER FILTER REMINDER notices.
SORRY, BREW INTERRUPTED
Your brewer will indicate “Sorry, brew interrupted” if there is a problem brewing. To clear the
problem, slowly lift and lower the Handle, remove the pod, and attempt a cleansing brew
(see page 11).
SORRY, THERE IS A PROBLEM
If the brewer indicates “Sorry, there is a problem,” coffee grounds may be stuck in the
Entrance Needle. To release the clogged Needle, use the Brewer Maintenance Accessory
included with your brewer. Refer to the instructions on page 20 or the guide included with
the Accessory.
Sorry, brew interrupted.
WATER UNDER PRESSURE.
SLOWLY OPEN HANDLE.
To reset, remove pod and lower
handle. Perform Needle Maintenance
if problem persists.
Questions?
Refer to User Guide.
Sorry, there is a problem.
WATER UNDER PRESSURE.
SLOWLY OPEN HANDLE.
To reset, remove pod and lower
handle. Perform Needle Maintenance
if problem persists.
Questions?
Refer to User Guide.
2 | TIPS & MAINTENANCE