Kettler BTR 300, Assembly Instructions Manual, Page: 16 / 26

Parts List
No. Name Specification Quantity
32 Flat washer Ø8. 5xØ20xt1.5 3
33 Hex locking nut M10 2
34 Flat washer Ø10 2
35 Allen C.K.S. full thread screw M10×20 4
36 Allen C.K.S. half thread screw M10×55×20 2
37 Philips pan head full thread screw M4×16 6
38 Saddle locking piece 1
39 Crank cover Ø23x6xM22xP1.0 2
40 Hex flange full thread screw 5/16-18UNC-1" 2
41 Crank (L) 1
42 Crank (R) 1
43 Disc 2
44 Philips C.K.S. self-tapping screw ST4×12 8
45 Magnet motor 1
46 Upright post trim strip 102x57x8 1
47 End cap 45x90xt1.5 4
48 Feet pad Ø49x22xM10x26 4
49 Allen C.K.S. hollow screw Ø8×33×M6×15 2
50 Wheels Ø55×25. 8 2
51 Allen C.K.S. full thread screw M6×15 5
52 Deep groove ball bearing 6203-2RS 3
53 Hex nut M5 2
54 Hex full head screw M5×60 1
55
Philips washer head end-cutting self-
tapping bolt
ST4×12 1
56 Saddle post bushing 115x90x45 1
57 Crank axis Ø17×150 1
58 Belt pulley Ø263×22 1
59 Hex locking nut M8 10
60 Saddle adjustment 1
61 Circlip for shaft Ø17 2
62 Circlip for shaft Ø12 2
63 Circlip for shaft Ø10 3