Kettler Astor GT Assembly Instruction Manual Download

Page: 5 / 28

Instructions for Assembly

Ensure that you have received all the parts required (see check

list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.

Before assembling the equipment, study the drawings carefully

and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.

The equipment must be assembled with due care by an adult

person. If in doubt call upon the help of a second person, if pos-
sible technically talented.

Please note that there is

always

a danger of injury when

working with tools or doing manual work. Therefore please be
careful when assembling this machine.

Ensure that your working area is free of possible sources of
danger, for example don’t leave any tools lying around. Always
dispose packaging material in such a way that it may not cause
any danger. There is always a

risk of suffocation

if children

play with plastic bags!

The fastening material required for each assembly step is shown

in the diagram inset. Use the fastening material exactly as
instructed. The required tools are supplied with the equipment.

Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt,

then use spanner to finally tighten nuts com-

pletely against resistance (locking device)

. Then check

that all screw connections have been tightened firmly.

Attention:

once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.

To pull off the pedal arms remove cap and screw (A). Grip the

pedal arm tightly, and screw in an M12 bolt (not supplied) into
the thread (B). After a few turns you may take off the pedal arm
(C).

For technical reasons, we reserve the right to carry out prelim-
inary assembly work (e.g. addition of tubing plugs).

List of spare parts page 26-27

When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).

Example order:

Art.no. 07960-680 / spare-part no. 10100030

/ 2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.

Goods may

only

be returned after prior arrangement and in

(internal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!

Important:

spare part prices do not include fastening material; if

fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words

„with fastening

material“

Waste Disposal

KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).

KETTLER (GB) Ltd.

Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain

http://www.kettler.co.uk

KETTLER International Inc.

1355 London Bridge Road · Virginia Beach · Virginia VA
23453 USA