14
Step 9
Assembly
C
B
A
D
G
E
F
Important: Have two people complete Steps 9-13. With assistance, lift one table top
onto the wheelbase; the legs will be facing outward. Have one person support the top
while it is resting on the base while the other person completes assembly.
Assemble crossbar to Jbars and support leg in the order shown. Note: a Jbar with safety
lever should be assembled on the right side) and a Jbar without lever on the left side.
The support leg is always assembled closest to the wheelbase. You may need to lower
table slightly to line up the bolt holes. Do not fully tighten the bolts until both ends are
assembled.
Jbar
Support
Leg
Jbar
Support
Leg
2 Required
dia 25x8
2 Required
m8x60
