![Kett LE-373 Operating Manual Download Page 30](http://html1.mh-extra.com/html/kett/le-373/le-373_operating-manual_1958603030.webp)
30
* The purpose of performing measurement 4 to 5 times for each
calibration using a substrate and calibration foils is to obtain the
average value.
* During calibration in the continuous measurement mode (see p. 23),
in steps
5 9
and
@
place the probe tip on the measurement surface,
and once the measurement value has stabilized, press the Enter key.
The value displayed at that time is recorded as calibration data.
* If a recent measurement value is displayed on the display, it can be
cleared with the Del key.
* When Esc is displayed on the display, you can return to the display
in step
7
. To do so, press the
→
key, select
Esc
, and then press
the Enter key. In this case, the calibration settings are canceled.
Step
Operation
Display
Explanation
^
Press the Enter key to return to the initial display.
* If
Esc
is selected on the display during step
@
through
^
and the
Enter key is pressed, the calibration settings are canceled.
Summary of Contents for LE-373
Page 1: ...373 Series Coating Thickness Testers LE 373 LH 373 LZ 373 Operating Manual...
Page 35: ......
Page 36: ...1205 MA 0301 400...