KETRON DG90 Owner'S Manual Download Page 68

Page: 68 / 120

VOCAL EFFECTS

The twelve algorithms of this mode are designed to modify the voice in an amusing and unexpected way. As soon as you select one of these
algorithms, the direct microphone signal is muted so as to allow the effects stand out better. You may restore it pressing

F1 Direct

and the

VALUE

+/- push buttons. Just try and listen to these algorithms: this will be better than any description we can offer in this manual. The algo-

rithm parameters can be modified using

F7 Filter

and can be saved in a Vocal Set.

SAVING A VOCAL SET IN RAM

Once you have modified any of the Vocal Set parameters, you need to store it in one of the twelve memories available to avoid losing them when
you exit from the

Vocalizer

mode or switch the DG 90 off. To activate the saving operation, press the

SAVE

ENTER

push button before exiting

Vocalizer.

The page displayed allows you to enter the name of the Vocal Set using the keys of the keyboard and the

CURSOR

+/- push buttons,

as well as to define the destination memory entering directly the relevant number on the numeric keypad (

STYLES

push buttons). Then press

F10 Exec

to confirm. If you wish to cancel the operation, press

F5 Escape

which takes you back to the

Vocalizer Edit

page without storing the

modifications, that are however still active. Another option available on the Save page is

F9 Default:

Pressing this button takes the Vocal set

back to it’s original settings.

SAVING A VOCAL SET ON DISK

The whole group of twelve Vocal Set memories can be saved either on a floppy disk or on a hard disk. Only the entire group of Vocal sets can
be saved as one file, but not the independent ones. Proceed as follows:

●

Activate the

DISK

menu by pressing the special button (the LED lights up)

●

Use

PAGE +/-

to select the target disk among Hard and Floppy

●

If you wish to save onto the hard disk, select the target folder by entering it’s number with the

STYLES

push buttons. Press

F3 Save

to acti-

vate the saving function.

●

Select the type of file to be saved, in this case

F10 Others

●

Select

F3 Vocal Set

from the next page.

●

This displays a new page where you have to enter the name of the file to be saved, using the keyboard keys and the

buttons,

and confirm the operation pressing

F10 Exec

. Press

F5 Escape

to exit.

●

After having terminated the operation, the display shows the contents of the target folder.

●

Press

EXIT

twice to go back to the main page.

LOADING A VOCAL SET FROM THE DISK

You may load the complete group of twelve Vocal Sets back from the disk using the following procedure:

●

Activate the

DISK

menu by pressing the special button (the LED lights up).

●

Use

PAGE +/-

to select the disk containing the file to be loaded.

●

Select the source folder entering it’s number with the

STYLES

push buttons.

●

Select the type of files to be loaded pressing

F5 File Choice

; a number of different options appear next to the function buttons. Then select

F10 Others.

●

Select

F3 Vocal Set

as a file to be loaded.

●

If a number of files is displayed, select the desired one pressing the

CURSOR

+/- buttons.

●

Confirm the loading procedure pressing

F2 Load

●

Press

EXIT

twice to go back to the main page.

For further procedures to save and load from disk, please refer to the Disk chapter in this manual.

AUTOMATIC VOCAL SET LOADING USING THE DG 90’S POWER ON SETUP

Thanks to the Power On Setup function described in this manual, you may load the desired Vocal set on turning on the DG 90. For this purpose,
select the desired Vocal Set from the Vocalizer page and then go back to the main display page pressing the

EXIT push button.

●

Start the saving procedure by pressing the

SAVE

ENTER

push button.

●

Confirm that you wish to save the Power On Setup pressing the

function key.

●

On the display, the following four options appear:

F5 Escape