background image

Kestrel

®

 4300 Construction Weather Tracker

17

Measurements 

Measurement screens can be turned off, or “hidden” from the normal measurement navigation. For 
example, if wind chill is not of interest, it can be hidden. Press the   or   button to toggle between ON 

and OFF for each individual measurement. Press the   or   button to highlight the desired measurement. 

Press the   button to return to the Main Setup Menu. Even when measurements are hidden, the Kestrel 

Meter will continue to log data for all measurements. If you wish to see the logged data for measurements 

that are hidden, simply enter the Measurement screen and turn them back on. The data will be stored in the 

same manner as all other measurements, as specified in the Store Rate. 
Graph Scale

These settings control the chart limits of your Kestrel Meter. Depending on the conditions, the lower and 

upper limits of the chart scale may need to be adjusted in order to get the best view of the data. Highlight 

the desired measurement by pressing the   or   button. Select the highlighted measurement by 
pressing the   button. Press the   or   button to increase or decrease the value of the limits.

Press the    or   button to change between the upper and lower limits. Press the   button to exit and 

return to the Measurement Selection screen. Press the   button to return to the Main Setup Menu. 

Units

The units of measure can be adjusted to best suit the application. The following units are available: 

Highlight the desired measurement by pressing the   or   button. Press the   or   button to scroll 

through the available units.  Press the   button to return to the Main Setup Menu. 

Wind Speed

Temperature, 

Dewpoint,  

Wet Bulb Temp, Wind 

Chill & Heat Index

Evaporation 

Rate

Pressure

Altitude, 

Density 

Altitude

m/s meters per 

second
km/h kilometers per 

hour
kt knots
mph miles per hour
ft/m feet per minute
Bft Beaufort

°C 

Celsius

°F 

Fahrenheit

lb/ft2/hr pounds per 

square feet per hour

kg/m2/hr kilograms per 

square meter per hour

InHg inches 

mercury
HPa 

hectopascals
psi  pounds per 

square inch
mb milibar

m meters
ft feet

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 4300




















Reviews: