background image

Kestrel

®

 4300 Construction Weather Tracker

21

APPLICATION EXAMPLES

This section provides examples of applications where a Kestrel Meter might be used, and the appropriate 

memory settings.
Concrete Placement
Auto Store  

On 

Store Rate   

1 minute 

Overwrite   

On 

Manual Store  

On

These settings will record continuously so you can monitor the conditions on the job site. With the 

automatic store rate set to 1 minute, you can store over 24 hours of data for later review. Use the manual 

store button to capture individual evaporation rate readings when you are measuring right over the 

concrete.
Weather Monitoring 

Auto Store 

On 

Store Rate 

1 hr 

Overwrite 

On 

Man Store 

Off

These settings will allow you to track conditions for 2 months.  When the memory is full, each new 

measurement will be stored in place of the oldest data point. The charts will provide a quick look at the 

recent weather conditions. Keep an eye out for falling barometric pressure, which indicates that a storm  

is coming.

Hiking/Camping for the Weekend  

Auto Store 

On 

Store Rate 

20 min 

Overwrite 

Off 

Man Store 

On

These settings will allow you to track the conditions for over 20 days. Measurements will be stored every 

20 minutes, and stop storing when the log is full. This will let you review the trip at your convenience when 

you return.  You can also manually store the conditions, in case you get caught in 40 mile per hour winds or 

make it to the top of a mountain. For more detailed information on your trip, set the Store Rate to 2 hours 

overnight, and 10 minutes during the day.
Soaring/Hang Gliding  

Auto Store 

On 

Store Rate 

2 min 

Overwrite 

Off 

Man Store 

On

These settings will allow you to track all conditions for 46 hours. Chart your altitude changes, watch how 

the temperature and humidity vary with altitude, and log your apparent speed. Data will no longer be 

stored once the log is full, in order to preserve it until it can be reviewed later. Be sure to clear the data log 

just before your flight.
 

 

 

 

 

www.

.com

[email protected]

1.800.561.8187

Summary of Contents for 4300




















Reviews: