background image

Kestrel

®

 4250 Racing Weather

®

 Tracker

15

Overwrite
(On/Off)

This setting only applies when the data 

log is full.  When On, oldest data point is 

discarded to allow memory for the new data 

point.  When Off, new data points are not 

saved.

Press   or   to toggle between 

On and Off.

Man Store
(On/Off)

When On, data is stored when the 

 

button is pressed. When off, the 

 button 

is disabled.

Press   or   to toggle between 

On and Off.

Measurements

Measurement screens can be turned off, or “hidden” from the normal measurement navigation. For 
example, if wind chill is not of interest, it can be hidden. Press the   or   button to toggle between ON 

and OFF for each individual measurement. Press the   or   button to highlight the desired measurement. 

Press the   button to return to the Main Setup Menu. Even when measurements are hidden, the Kestrel 

Meter will continue to log data for all measurements. If you wish to see the logged data for measurements 

that are hidden, simply enter the Measurement screen and turn them back on. The data will be stored in the 

same manner as all other measurements, as specified in the Store Rate.
Graph Scale

These settings control the chart limits of your Kestrel Meter. Depending on the conditions, the lower and 

upper limits of the chart scale may need to be adjusted in order to get the best view of the data. Highlight 

the desired measurement by pressing the   or   button. Select the highlighted measurement by 
pressing the   button. Press the   or   button to increase or decrease the value of the limits. Press the   

or   button to change between the upper and lower limits. Press the   button to exit and return to the 

Measurement Selection screen. Press the   button to return to the Main Setup Menu. 

Units

The units of measure can be adjusted to best suit the application. The following units are available: 

Wind Speed

m/s  

meters per second 

km/h  

kilometers per hour 

kt   

knots 

mph  

miles per hour 

fpm  

feet per minute 

Bft  

Beaufort

Temperature, Dewpoint,  

Wet Bulb Temp & Heat Index

°C     

Celsius 

°F     

Fahrenheit

Pressure

inHg  

inches mercury

hPa  

hectopascals

psi   

pounds per square inch

mb  

millibar

Altitude, Density Altitude

m  

meters 

ft  

feet

Moisture (Water Grains)

gpp  

grains per pound 

g/kg  

grams per kilogram

Air Density

lb/ft

3

   

pounds per cubic foot

kg/m

3

 

kilograms per cubic meter

Highlight the desired measurement by pressing the   or   button. Press the   or   button to scroll 

through the available units.  Press the   button to return to the Main Setup Menu. 

Summary of Contents for 4250


















Reviews: