IT
4.7
Montaggio del motore di propulsione delle clapet antiriflusso (opzionale)
La dotazione comprenderà uno o due motori di propulsione
a seconda della versione.
Marcatura del cavo
Funzione
Grigio
Clapet antiriflusso
Nero
Chiusura ridondante
Fissare il motore di propulsione (2) alla clapet antiriflusso e,
in via opzionale, alla chiusura ridondante come segue:
Qualora la posizione non sia già stata scelta, portare la
leva di chiusura (4) in posizione “CHIUSA” (come illu-
strato).
Rimuovere il cappuccio di protezione (3).
Fissare il motore di propulsione (2) con 4 viti (1).
In presenza di impianti con una profondità del pozzetto
ridotta (anello conico immediatamente al di sopra del ser-
batoio) è necessario smontare l’intero gruppo costruttivo
della clapet antiriflusso (chiusure rapide) per l’installa-
zione del motore di propulsione.
4.8
Montaggio della centralina
Montare la centralina nel rispetto delle istruzioni allegate alla centralina stessa.
Posare in modo sicuro tutti i cavi dei componenti elettrici.
Modem GSM di telecontrollo
Montare il modem di telecontrollo (codice articolo 28792) in base alle rispettive istruzioni di montaggio 434-033.
4.8.1
Fissaggio / collegamento della centralina della chiusura ridondante (opzionale)
Montare la centralina FKA Comfort (2) ai sensi delle istruzioni allegate al presente apparecchio.
Montare un passante per i cavi accanto al passante per i cavi (g) sulla centralina principale (Comfort PLUS) (1).
Realizzare l’alimentazione di corrente della centralina ridondante (FKA Comfort)
tramite un circuito elettrico sepa-
rato(!)
.
Realizzare il collegamento di comunicazione tra centralina ridondante (FKA Comfort) (2) e centralina principale (1).
Collegare il cavo LIN-BUS in dotazione in base allo schema seguente:
66 / 116
Sistema di sollevamento contro il riflusso /
Istruzioni per l’installazione e l’uso
010-694