15
Montage
8.2 Assembly of the hand guard
The installation of the handguard is described in more detail below and illustrated in Figure 8.2.
1. To install the left-hand guard, place the supplied drilling template (Fig. 8.2, item 1) on the hand spar
(Fig. 8.2, item 2) and drill two 6.5 mm holes.
2. Screw on the left mounting bracket (Fig. 8.2, Pos. 3) with 2 M 6 x 20 screws, 2 body washers and 2
lock nuts.
3. Fasten the hand guard with 2 M6 x 20 screws, 2 large washers and 2 lock nuts.
4. Perform the same steps for mounting the right-hand guard.
1
3
2
Illustration 8.2
