English
-
4
-
Filling the fuel tank
Fill the fuel tank with diesel (fig. ).
Do not use fuel other than that indicated on the rating plate.
While the hot water generator is in function, check the fuel
level regularly. Functioning without fuel could damage the
diesel pump.
•
Using unsuitable fuel, leading to at-risk situations.
•
Using the equipment alone (not in combination with a high
pressure water cleaner).
Use only original accessories offering maximum quality and
security. Failure to use original accessories absolves the
manufacturer from all liability.
PRELIMINARY
OPERATIONS
Unpacking
:
After unpacking the appliance, check it is complete and undam
-
aged.
If in doubt, do not use the hot water generator. Contact your
local dealer. Packaging (bags, boxes, nails etc) should be
kept out of reach of children as they may represent a potential
hazard. They should be disposed of or kept according to the
environmental legislation in force in the country concerned.
Assembling parts supplied separately
All main parts and safety devices are assembled by the
manufacturer. Certain other secondary parts may be supplied
separately.
These parts must be assembled by the user following the as
-
sembly instructions.
Identification plate:
On purchase, make sure the product has an identification
plate. If this is missing, notify the manufacturer and/or dealer
immediately.
Use of an appliance without an identification plate absolves the
manufacturer from all liability. Products without an identifica
-
tion plate should be considered as anonymous and potentially
dangerous.
The main technical characteristics of the hot water generator
are given on a plate applied to the front of the appliance (fig.
1).
The user must ensure that the rooms where the hot water
generator is to be used comply with all safety standards and
regulations in terms of:
-
efficient electrical installations;
-
the absence of explosive, inflammable, toxic or corrosive
substances.
Use of the appliance in particular conditions requiring use of
class II appliances only is not recommended.
CONNECTING TO THE WATER MAIN
Connect the water supply pipe to the coupling on the water
cleaner and the inlet coupling on the hot water generator (fig.
).
Connect the H.P. pipe supplied with the high pressure water
cleaner to the output of the hot water generator and the lance
(fig. ).
Connect the H.P. water cleaner to the mains water supply, fol
-
lowing the instructions in the accompanying manual.
Maximum temperature of inflow water: 0°C (1°F)
Electrical connections
The hot water generator should be connected to the mains in
accordance with current legislation (in Italy, law 6/90)
Make sure the \mains voltage corresponds to the voltage
required by the appliance and indicated on the rating plate
(fig. 1).
Protect the electric cable from accidental crushing.
Failure to respect the above conditions absolves the manu
-
facturer from all liability and represents negligent use of
the product.
Protection against accidental contact.
Before removing the panels, unplug the appliance from the
mains. Before using the appliance, make sure the closing panels
are correctly mounted and fastened.
Failure to respect these instructions could result in electric shock
and absolves the manufacturer from all liability.
!
!
!
!
