KERR 1258 Series, Operation Manual And Parts List

Page: 6 / 20

6
G
ENERAL
S
PECIFICATIONS
Environmental Conditions
Operating: 17°C to 27°C; 20% to 80% relative humidity, non-condensing. Installation
Category II (overvoltage) in accordance with IEC 664. Pollution degree 2 in
accordance with IEC 664.
Altitude Limit: 2,000 meters.
Storage:
-25°C to 65°C; 20% to 85% relative humidity
Declaration of Conformity
Barnstead International hereby declares under its sole responsibility that this product conforms with the tech-
nical requirements of the following standards:
EMC: EN 61000-3-2 Limits for harmonic current emissions
EN 61000-3-3 Limits for voltage fluctuations and flicker
EN 61326-1 Electrical equipment for measurement,
control and laboratory use; Part I: General
Requirements
Safety: EN 61010-1 Safety requirements for electrical
equipment for measurement, control and
laboratory use; Part I: General Requirements
EN 61010-2-010 Part II: Particular requirements for
laboratory equipment for the heating of materials
per the provisions of the Electromagnetic Compatibility Directive 89/336/EEC, as amended by 92/31/EEC and
93/68/EEC, and per the provisions of the Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
The authorized representative located within the European Community is:
Electrothermal Engineering Ltd.
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
Copies of the Declaration of Conformity are available upon request.