Colposcope Digital Imaging System
2
l
The gynecological examination should not be done before colposcope
examination.
l
Cervical cancer prevention smear, cleanliness, and trichomoniasis, mold
inspection shall be completed ahead of schedule in the general out-patient.
l
Colposcope examination is only a secondary means, the results are not the end
result, other tests should be combined to determine the result, ultimately
determine the cause.
l
In order to avoid electric shock and reduce device failure, can not make water
into device. If liquid is fallen onto the machine, shut down machine immediately,
and contact with our service people immediately.
l
Need check all cable before using, need notice to avoid make cable intertwine on
the neck of patient, need replace bad cable and connector immediately.
l
Colposcope lens are precision optical instruments, any landing, collision may
cause lens or optical axis offset, resulting image is not clear and can not be used.
l
Incorrect method to close the mainframe will affect the software to be used
normally,even damage the system's software functions.
l
Avoid using camera equipment on the strong bright place to image acquisition
such as strong light source, the Sun etc.
l
In the process of using camera equipment, away from the RF lines as far as
possible such as audio or video source.
l
Do not save records in the system disk and install directory.
l
When backup data, other operations are not allowed, or else affects the speed or
even lead to crashes.
l
Equipment power is sudden off during normal use, it will not make operator or
patient injury, Please click manual steps, and close the proceedings, when power
is on again, operate the equipment normally in accordance with the manual.
l
Removable porous plug cannot be placed on the ground, the MAX load: AC
10A/250V.
l
Removable porous outlet only to be used to the system equipment, not connect
external equipment. If connect others,, there may lead to the security risks
文件使用
"pdfFactory Pro"
试用版本创建
