Kernau KGH 6422T CI X FLAT, Instruction Manual

Page: 27 / 68

EN
27
CHAPTER 4. CLEANING
IMPORTANT:
Always disconnect the appliance from the gas and electricity mains before carrying out any cleaning operation.
ENAMELLED PARTS
• The enamelled parts must be washed with a sponge and soapy water or with a light detergent
• Do not use abrasive or corrosive products.
• Do not leave substances, such as lemon or tomato juice, salt water, vinegar, coffee and milk on the
enamelled surfaces for a long time.
STAINLESS-STEEL PARTS
• Stainless-steel can be stained if it remains in contact with highly calcareous water or aggressive
detergents for an extended period of time.
• The stainless-steel parts should also be cleaned with soapy water and then dried with a soft cloth.
BURNERS AND RACKS
• These parts can be removed to make cleaning easier.
• The burners must be washed with a sponge and soapy water or with a light detergent, wiped well and
placed in their housing perfectly. Make sure that the flame-dividing ducts are not clogged.
• Check that the feeler of the safety valve and the start-up electrode are always perfectly cleaned, so as
to ensure an optimum operation.
GAS TAPS
• The possible lubrication of the taps must be carried out by specialized personnel, exclusively.
• In case of hardening or malfunctions in the gas taps, apply to the Customer Service.