EN
43
•
When you clean the burner do not use acid, thinner, benzene or similar chemical You need to clean
your glass hob and its grills with suitable cleaning agents.
•
It should be cleaned with suitable cleaners for stains and oil.
•
Harsh cleaning agents, stain removers and detergents, wire wool and sponge should not be used.
•
Do not allow heating of the pans when empty since the heat accumulated at the bottom may damage
the glass surface.
•
No cold liquid should be poured on the glass surface or the burners when they are hot. The glass may
crack due to thermal shock.
Clean the hob regularly after waiting for it to cool down after each use in order to keep your hob at the
best manner.
Do not take out the control switches in any way during cleaning.
Enamel Parts:
•
All enamel parts can be cleaned by using water with soap and suitable detergents. The hob should
be dried thoroughly after the process.
Pan Supports:
•
Enamel grills can be washed in the dishwasher.
Burner:
•
The burners consisting of two parts may be cleaned by using detergent.
•
The burners should be dried after cleaning process and placed their places delicately.
•
In the electronic ignition models, the electrode should be kept clean all times.
•
In the safety valve models, the thermocouple should be cleaned for failsafe operation.
•
After completion of the process, the burners should be placed back.
•
The burning system should not be used when burners are not in their places to avoid damage
to electronic ignition system.
Glass ceramic surfaces:
•
Wipe the glass ceramic surface using a piece of cloth dampened with cold water in a manner as not
to leave any cleaning agent on it. Dry with a soft and dry cloth. Residues may cause damage on the
glass ceramic surface when using the hob next time.
•
Dried residues on the glass ceramic surface should under no circumstances be scraped with hook
blades, steel wool or similar tools.
•
Remove calcium stains (yellow stains) by a small amount of lime remover such as vinegar or lemon
juice. You can also use suitable commercially available products.
•
If the surface is heavily soiled, apply the cleaning agent on stains and wait until it is absorbed well.
Then, clean the surface of the hob with a damp cloth.
INFORMATION:
Slight color fading may occur on coatings or other surfaces in time. This will not affect operation of the
product. Color fading and stains on the glass ceramic surface is a normal condition, and not a defect.
Summary of Contents for KGH 3233 CI B
Page 91: ...UA 91 www kernau com ...
