Kernau KFRC 18151 NF W, Instruction Booklet

Page: 39 / 80

EN
39
IMPORTANT NOTES:
• In case of a sudden power loss or disconnecting and reconnecting of the plug to the electrical socket,
the compressor protective thermal element will be opened as the pressure of the gas in the cooling
system of your refrigerator has not yet been balanced. 4 or 5 minutes later, your refrigerator will start
to operate; this is normal.
• If you won’t be using your refrigerator for a long time (such as on summer holidays), please disconnect
the plug from the socket. Clean your refrigerator as per Part 4 of this document and leave the door
open to prevent any humidification or odor formation.
• If there is still a problem with your refrigerator although you have followed the instructions in this
book, please consult your nearest authorized service center.
• The lifetime of your appliance is stated and declared by the Department of Industry. The length of time
for retaining parts required for the proper operation of the appliance is 10 years.
TIPS FOR SAVING ENERGY
1. Install the appliance in a cool, well ventilated room , but not in direct sunlight and not near a heat
source (radiator, cooker.. etc). Otherwise use an insulating plate.
2. Allow warm food and drinks to cool down outside the appliance.
3. When thawing frozen food, place it in the refrigerator compartment. The low temperature of the frozen
food will help to cool the refrigerator compartment when it is thawing. This will help to save energy.
If the frozen food is put out, it results in a waste of energy.
4. Cover drinks or other liquids when placing them in the appliance Otherwise humidity increases in the
appliance. Therefore, the working time gets longer. Also covering drinks and other liquids helps to
preserve smell and taste.
5. Try to avoid keeping the doors open for long periods or opening the doors too frequently as warm air
will enter the cabinet and cause the compressor to switch on unnecessarily often.
6. Keep the covers of the different temperature compartments (crisper, chiller ...etc ) closed
7. Door gasket must be clean and pliable. Replace gaskets if worn.
8. Energy consumption of your appliance is declared without drawers and fully loaded in freezer
compartmant.
9. For saving energy, do not use volume between the load limit and the door, along the load limit line.
Load limit line is also used in energy consumption declaration.