Kernau KFDW 6751.1 W /X, User Manual

Page: 62 / 120

EN- 62
Cancelling the Program
When you want to cancel the program while a washing cycle is running on.
After the End light has become
on, press the On/Off button
to switch off the machine.
Unplug the appliance.
Turn off the water tap.
Press and hold the Start/
Pause button for 3 seconds.
End light will flash during the cancelling
process. The machine will drain the
water inside for about 30 seconds.
NOTE: Do not open the door until the program finishes.
NOTE: At the end of the washing program, you can leave the door of the machine ajar to
speed up the drying process.
NOTE: If you open the door of the machine or if power gets cut during the washing cycle,
the program will resume once the door has been closed or the power has recov-ered.
CLEANING AND MAINTENANCE
Cleaning your dishwasher is important to maintain the machine’s service life Make sure
that the water softening setting (If available) is done correctly and correct amount of
detergent is used to prevent limescale accumulation. Refill the salt compartment when the
salt sensor light comes on.
Oil and limescale may build up in your Dishwasher over time. If this occurs:
• Fill the detergent compartment
but do not load any dishes. Select
a programme which runs at high temperature and run the Dishwasher empty. If this
does not clean your Dishwasher sufficiently, use a cleaning agent designed for use
with dishwashers.
• To extend the life of your dishwasher, clean the appliance regularly on each month
• Wipe the door seals regularly with a damp cloth to remove any accumulated residue
or foreign objects.
Filters
Clean the filters and spray arms at least once a week. If any food waste remains or
foreign objects on the coarse and fine filters, remove them and clean them thoroughly
with water.
a) Micro Filter b) Coarse Filter c) Metal Filter
1 2
a
b
3 4
c