Kernau KFDW 6751.1 W /X, User Manual

Page: 53 / 120

EN- 53
Add the proper detergent for the selected program to ensure the best performance. The
amount of detergent needed depends on the cycle, load size, and soil level of dishes.
Do not fill detergent into the detergent compartment more than required; otherwise you
can see whitish streaks or bluish layers on glass and dishes and may cause glass
corrosion. Continued use of too much detergent may cause machine damage.
Using little detergent can result in poor cleaning and you can see whitish streaksin hard
water.
See the detergent manufacturer’s instructions for a further information.
Filling the detergent
Push the latch to open the dispenser and pour in the detergent.
Close the lid and press it until it locks in place. The dispenser should be refilled just before
the start of each programme. If the dishes are heavily soiled, place additional detergent in
the pre-wash detergent chamber.
DETERGENT
Using combined detergents
These products should be used according to the manufacturer’s instructions.
Never put combined detergents into the interior section or the cutlery basket.
Combined detergents contain not only the detergent but also rinse-aid, salt replacement
substances and additional components depending on the combination.
We recommend you do not use combined detergents in short programmes.
Please use powder detergents in such programmes.
If you encounter problems when using combined detergents, please contact the detergent
manufacturer.
When you stop using combined detergents, make sure that water hardness and rinse aid
settings are set to the correct level.
Rinse-aid usage
The rinse aid helps to dry the dishes without streaks and stains. Rinse-aid is required for
stain-free utensils and clear glasses. The rinse aid is automatically released during the hot
rinse phase. If rinse aid dosage setting set too low, whitish stains remains on dishes and
dishes do not dry and washed clean.
If rinse aid dosage setting set too height, you can see bluish layers on glass and dishes.
Filling the rinse-aid and setting
To fill the rinse aid compartment, open the rinse-aid compartment cap. Fill the compartment
with rinse aid to the MAX level and then close the cap. Be careful not to overfill the rinse aid
compartment and wipe up any spills.