Kernau KCH 4860 B, Installation And Operation Manual

Page: 27 / 29

EN
27
KCH 4860 B / KCH 4890 B
If you want to cancel the function of automatic hood motor shutdown, then
press the button of programming the hood shutdown again during measuring
of the time.
Note: Turning on the automatic shutdown function (Timer) must be carried
out within 20 seconds, otherwise when no activity is performed, the cooker
hood will automatically switch to normal operating mode.
Maintenance
Note! Before carrying out any cleaning or maintenance activity, it’s
necessary to disconnect the cooker hood from the power supply by
removing the plug from the socket or by turning off the main power
switch.
Cleaning of the cooker hood
The cooker hood must be often cleaned, both inside and outside (at least with
the same frequency as in the case of grease filter cleaning), with the use of a
cloth moistened with mild agents. It’s prohibited to use any abrasives.
IT’S PROHIBITED TO USE ALCOHOL!
Note: Failure to comply with the regulations on cleaning of the device and
replacement of the filters results in a fire hazard. Therefore, it’s recommended
to comply with the indicated guidelines. The manufacturer is not responsible
in any way for possible motor damage or fire resulting from failure to comply
with the maintenance rules and the above-mentioned instructions.
Grease filter
It stops the grease particles originating from cooking. It must be cleaned at
least once a month (or when the filter contamination indicator - if your model
of cooker hood is equipped with such indicator - informs about the need to
replace it), with the use of a non-aggressive cleaning agent, manually or in a
dishwasher at low temperature and in a short washing cycle. In case of washing
in a dishwasher, the metal grease filter may become discoloured, however its
specific filtering characteristics will not change. In order to remove the grease
filter, it’s necessary to pull the spring handle.