Kernau KCH 1861 NP, Manual Instruction, Page: 35 / 50

The technical data in this manual and on the attached labels were obtained by carring out measurements
and calculations in accordance with the requirements of EU Regulations No. 65/2014 and 66/2014.
Mechanical control
The switch located next to the fan symbol servs to turning on the fan and regualates the motor
speed as a consequence, the amount of sucked air:
Position 0 – fan is not working
Position I – low speed
Position II – medium speed
Position III – high speed
The switch located next to the lightbulb symbol serves to turning on the lightning:
Position 0 – light is OFF
Position I – light is ON
The control is done by moving the slider to the right or left.
Removing used appliances
After finishing using the equipment the product must not be disposed of
with household waste. It should be taken to the collection and recycling point
for electrical and electronic equipment. This is indicated by the symbol placed
on the product, in the manual instructions or on the packaging. The plastics used
in the device can be reused according with their designations. Thanks to re-use,
use of materials or other forms of used equipment, you make a significant impact
to environmental protection. For information on the appropriate point of
disposal of used devices, please contact your commune administrator.
EN 35