SFB-BA-e-1013
11
3.1 Proper use
f material
, i.e. the
placed in the centre of the weighing
plate. As soon as a stable weighing value is reached the weighing value can be read.
quantities are
removed or added to the material to be weighed, incorrect weighing results can be
displayed due to the “stability compensation“ in the balance. (Example: Slowly
system.
maximum load (max) of the weighing
plate, minus a possibly existing tare load, must be strictly avoided. Balance may be
xplosive environment. The serial version is not explosion
rotected.
he structure of the balance may not be modified. This may lead to incorrect
d faults and destruction of the balance.
d according to the described conditions. Other areas of
se must be released by KERN in writing.
3.3
nt
Warranty claims shall be voided in case
•
dit
ion manual are ignored
•
plia
tside the described uses
•
lia
or opened
•
liquids, natural wear and tear
•
•
The measuring system is overloaded
3 Basic Information (General)
The balance you purchased is intended to determine the weighing value o
to be weighed. It is intended to be used as a “non-automatic balance”
material to be weighed is manually and carefully
3.2 Improper Use
Do not use balance for dynamic weighing. In the event that small
draining fluids from a container on the balance.)
Do not leave permanent load on the weighing plate. This may damage the measuring
Impacts and overloading exceeding the stated
damage by this.
Never operate balance in e
p
T
weighing results, safety-relate
The balance may only be use
u
Warra y
Our con ions in the operat
The ap
nce is used ou
The app nce is modified
Mechanical damage or damage by media,
The appliance is improperly set up or incorrectly electrically connected
