PLE-BA-e-0812
19
10 Basic Operation
10.1 Switching on/off
Start-up
Press
for approx. 0.5 sec.
The balance will carry out a self-test The balance is ready for
weighing when the weight display appears.
Switching Off
Press
for approx. 0.5 sec.
-OFF-
appears
briefly
before the display disappears.
10.1.1 Stability display
The appearance of the stability symbol
[
]
on the display indicates that the
weighing plate is in a stable state. If the status is instable the
[
]
display
disappears.
10.1.2 Balance zero display
Should the balance not display exactly zero despite empty balance pan, wait for
stability display and press the
button. The balance start with resetting to zero
and the symbol "a" will appear.
Zeroing is only possible in the range
±
2% MAX (Err2).
10.2 Simple weighing
1. Place goods to be weighed on balance
2. Wait until the stability display appears
[
]
3. Read weighing result
10.3 Weighing with taring
The dead weight of any weighing container may be tared away by pressing a button
or by numerical input, so that the following weighings show the net weight of the
goods to be weighed.
10.3.1 Taring
Ö
Put on weighing receptacles and press
. The zero display and the symbol
Net
will appear.
The tare weight is saved until it is deleted.
Information:
The tare procedure can be repeated as many times as necessary, for example
with initial weighing of several components for a mix (add-on weighing). The
limit is reached when the total weighing range capacity is full. After removing
the taring container the total weight is displayed as negative display.
Taring is not possible with negative display values or zero display (Err3).
