MWA-M / MWA-PM-BA-e-1614
39
16 Instant help
In case of an error in the program process, briefly turn off the balance and disconnect
from power supply. The weighing process must then be restarted from the beginning.
Fault
Possible cause
The displayed weight does
not glow.
•
The balance is not switched on.
•
The mains supply connection has been
interrupted (mains cable not plugged in/faulty).
•
Power supply interrupted.
•
Rechargeable battery inserted incorrectly or
empty
•
No rechargeable battery inserted
The displayed weight is
permanently changing
•
Draught/air movement
•
Table/floor vibrations
•
The weighing plate is in contact with foreign
bodies or is not correctly positioned.
•
Electromagnetic fields / static charging (choose
different location/switch off interfering device if
possible)
The weighing result is
obviously incorrect
•
The display of the balance is not at zero
•
Adjustment is no longer correct.
•
Great fluctuations in temperature.
•
Warm-up time was ignored.
•
Electromagnetic fields / static charging (choose
different location/switch off interfering device if
possible)
Should other error messages occur, switch balance off and then on again. If the error
message remains inform manufacturer.
