7
INTENDED USE
ASSEMBLY AND PREPARATION FOR USE
OPERATION
GENERAL MAINTENANCE
Filling / refilling
Please follow these steps to fill the Blowtorch:
- Make sure that the blowtorch is switched off.
- Turn the blowtorch on its head.
- Insert the nozzle of the gas cartridge downwards into the inlet valve (3) of the blowtorch. For ideal results, press the gas cartridge
with a pumping motion into the valve (image 2).
- Wait a few minutes for the gas to stabilise.
Igniting
- Slide the safety lock switch (5) down until it clicks into position.
- Push the ignite button (4). The blowtorch ignites immediately. (Image 3)
- The blowtorch switches to continuous operation (image 4) when locking the continuous operation switch (6) The ignition button (4)
can therefore be released without the flame going out. If the switch is on "off" the flame will go out automatically after releasing it.
Adjustment of the flame
- Length and strength of the flame: this is adjusted by the flame adjustment wheel (7) ( + / - ) (image 5).
Completion of the task - switching off the blowtorch
Initially ensure that the switch for continuous operation is set to "off". Then let go of the ignition button (4).
TIP! Preparation of Crème Brûlée
Prepare the Crème Brûlée as usual and add 1-2 teaspoons of brown sugar per portion on the Crème Brûlée. Heat the sugar carefully
until it caramelises and turns a nice brown colour. Please remember that the edges of the pot can get extremely hot, use pot holders
if necessary.
The blowtorch is intended for use as soldering torch and for food preparation.
Any change of the device is regarded as a non-intended use, poses a significant risk of accidents and is therefore not permitted.
Note! The Blowtorch is supplied empty and has to be filled up with gas prior to its first use.
- The device does not require maintenance.
- Do not alter the device.
- If the device has an operating fault, have a specialist workshop carry out the repair or get in touch with the manufacturer. Address
on the reverse.
Storage and transport conditions
- If not in use, store the device in a safe, cool, dry and well ventilated place, out of reach of children.
- Protect against exposure to direct sunlight and avoid temperatures of more than 40° C.
Recycling
Devices which are no longer in usable have to be recycled at a recycling
centre. Do not put into household waste. Contact your local authority for further information. Dispose of the packaging according to
the type of material and according to the local regulations in your area.
035126_Anleitung_Kern_180x127.indb 7
24.10.2018 12:53:40