MLS-BA-defsi-0713
72
3.5 Guarantee
Warranty claims are voided in case of
- non-observation of our guidelines in the operating instructions
- use outside the described applications
- alteration to or opening of the device
- mechanical damage and damage caused by media, liquids,
natural wear and tear
- inappropriate erection or electric installation
- overloading of the measuring equipment
3.6 Monitoring the test substances
The metrology features of the balance and any possible available adjusting weight
must be checked at regular intervals within the scope of quality assurance. For this
purpose, the answerable user must define a suitable interval as well as the nature
and scope of this check. Information is available on KERN’s home page (
www.kern-
sohn.com
) with regard to the monitoring of balance test substances and the test
weights required for this. Test weights and balances can be adjusted quickly and at a
reasonable price in KERN’s accredited DKD calibration laboratory (return to national
normal).
4 Fundamental safety instructions
4.1 Observe notices in the operating manual
Please read the operating instructions carefully before erecting and commissioning, even if you
already have experience with KERN balances.
4.2 Training of personnel
The device may only be operated and looked after by trained members of staff.
5 Transport and storage
5.1 Acceptance
check
Please check the packaging immediately upon delivery and the device during
unpacking for any visible signs of external damage.
5.2 Packing
Please retain all parts of the original packaging in case it should be necessary to
return items at any time.
Only the original packaging should be used for return consignments.
Before despatch, disconnect all attached cables and loose/movable parts.
Apply any intended transport security devices. Secure all parts e.g. weighing plate,
mains power supply etc. against slipping and damage.
