KERN IFB-BA-e-1012, Operating Instructions Manual, Page: 26 / 30

Overview:
Menu block
Main menu Menu item
Sub-menu
Available settings / definition
SET H Upper limit, for entry see chpt. 7.6
SET LO Lower limit, for entry see chpt. 7.6
no
Acoustic signal turned off for weighing with
tolerance limits
ok
Acoustic signal sounds if load is within tolerance
limits
PO CHK
Weighing with
Tolerance limits,
see chpt. 7.6
BEEP
ng
Acoustic signal sounds if load is beyond
tolerance limits
CONT
Continuous data output
ST1
One output for stable weighing value
STC
Continuous data output of stable
Weighing values
PR1
Output after pressing
PR2
Manual add-up, see chpt. 7.7
After pressing , weighing value will be
added to summation memory and issued.
AUTO
Automatic add-up, see chpt. 7.8
This function is used to automatically add and
send individual weighing values to the
summation memory whilst weighing instrument
is being unloaded.
MODE
ASK
Remote control instructions:
R, “read“
T, “tare“
Z, “zeroing“
BAUD Available baud rate 600, 1200, 2400, 4800, 9600
7E1 7 bits, even parity
7o1 7 bits, odd parity
Pr
8n1 8 bits, no parity
tPUP Standard printer setting
P1 COM
Interface
parameters
PTYPE
LP50 Not documented
COUNT Display internal resolution
DECI Position of the decimal dot
DUAL Weighing scale type, capacity and readability (non-
verified) or verification value (verified).
CAL Adjustment, see chpt. 6.5
P2 CAL
GrA Not documented
on Keyboard interlock enabled
LOCK
off Keyboard interlock disabled
on Animal weighing enabled
P3 OTH
s. Kap. 7.9 / 7.10
ANM
off Animal weighing disabled
IFB-BA-e-1012 26