HFD-BA-e-1820
31
8. Adjustment
Switch-off balance and attach a carrying help if necessary.
Switch-on balance with attached carrying help and during the selftest
press the
TARE
button. "
P1 - - -
" will be displayed.
Enter password "000" :
Select a number by the
M+
key
Increase the numeric value using the
TARE
key
Confirm by the
ZERO
key. The first function „F0 cal“ is displayed.
Press the
ZERO
button, „UnLoAD“ will be displayed.
For verified models press the adjustment button at the balance bottom
Unload the balance and wait until the
[
]
above
appears.
Press the
ZERO
button, the currently set adjustment weight is displayed.
In order to change, select the number to be changed by the
M+
button and
set the desired value using the
TARE
button, the active digit flashes.
Confirm by the
ZERO
button, „LoAd“ will be displayed.
Attach the adjustment weight and wait until the
[
]
above
appears
Press the
ZERO
button.
After successful adjustment the balance carries out a selftest, then it automatically
returns to weighing mode.
An adjusting error or incorrect adjusting weight will be indicated by the error
message; repeat adjustment procedure
Summary of Contents for HFD 10T-3
