26
HDB-BA-e-1730
6.7.3
Peak value function
This function displays the highest load value (peak value) of a weighing.
Measuring frequency: 200ms
Attention:
Never exceed the maximum permitted load of the peak value on the
balance (!!Danger of breaking!!).
Switch on the balance, keep the
HOLD
-button pressed until the current setting
„Hx“ (H1 – H6) appears.
Press
ON/OFF
button repeatedly until the setting
„H6“
is displayed.
Use the
HOLD
-button to confirm your selection
Suspend the material to be weighed
The peak value appears for a short time, symbolised by the [
] top left. The
balance returns automatically to zero and is ready for further measurement.
7. Menu
When the balance is switched off, press the
HOLD
-button and keep it pressed
Do not release the
HOLD
-button. Press also the
ON/OFF/TARE
-button and keep
it pressed
Keep the
ON/OFF/TARE
-button pressed, however release the
HOLD
-button
Press
HOLD
-button anew
Keep both buttons pressed until in the display “
tr
” appears
Release both buttons. The balance is situated in the menu.
Using the
ON/OFF/TARE
button you can select between the following functions:
tr
(Zero tracking):
ON/OFF
AF
(Auto off):
ON/OFF
rST
(reset to factory settings):
YES/NO
Press the
HOLD
button to confirm the selected function
In the display appears the current setting
„ON“
or
„OFF“
. With help of the
ON/OFF/TARE
-button you can select between
„ON“
or
„OFF“
. Confirm your
selection with the
HOLD
-button. After a short period the balance returns
automatically to weighing mode.
