KERN HDB 10K-2XL Operating Manual Download

Page: 25 / 33

HDB-BA-e-1730

6.7.1

Data-Hold function



Switch on the balance, keep the

HOLD

-button pressed until the current setting

„Hx“ (H1 – H6) appears.



Press

ON/OFF

button repeatedly until the desired setting

„H1-H4“

is displayed.



Confirm setting with the

HOLD

button.



Suspend the material to be weighed



The weight value is fixed and displayed depending on the setting (H1

– H4) (see

chap. 5.7), represented by the [



] in the upper left.

6.7.2

Animal weighing function

This function is suitable for busy weighing procedures. The result is a mean value
formed by 16 weighing values which is found out within 3 seconds.



Switch on the balance, keep the

HOLD

-button pressed until the current setting

„Hx“ (H1 – H6) appears.



Press

ON/OFF

button repeatedly until the setting

„H5“

is displayed.



Confirm setting with the

HOLD

button.



Suspend the material to be weighed



Press the

HOLD

-button, the display counts reverse from 3 -1.

The calculated mean value is indicated, symbolised by the [



] top left.



Before further measurements press first the

ON/OFF/TARE

-button.

Summary of Contents for HDB 10K-2XL


































Search results

Summary of Contents for HDB 10K-2XL

Reviews:

Related manuals for HDB 10K-2XL

Brands by name

Popular brands

KERN HDB 10K-2XL, Operating Manual

Search results

Summary of Contents for HDB 10K-2XL

Reviews:

Related manuals for HDB 10K-2XL

Brands by name

Popular brands