4.2.4
F4
- INITIAL ZERO RANGE
To enter this parameter, press the
[Tare]
key when “
F4
” is shown.
The display will show the current initial zero range.
Press the
key to change the value and press
[Tare]
to accept the value.
NOTE: Only 10% is allowed for the CPB-M scales.
4.2.5
F5
- RE-ZERO RANGE
To enter this parameter, press the
[Tare]
key when “
F5
” is shown.
The display will show the current re-zero range.
Press the
key to change the value and press
[Tare]
to accept the value.
NOTE: Only 2% is allowed for the CPB-M scales.
4.2.6
F6
- SUCCESSIVE TARE
To enter this parameter, press the
[Tare]
key when “
F6
” is shown.
The display will show if the successive tare is on or off.
Press the
key to change the value.
Press
[Tare]
to accept the displayed value.
NOTE: Either option is allowed for the CPB-M scales.
CPB-SH-e-0721
13
Summary of Contents for CPB 15K0.5
