KERN ABT 100-5M, Operating Instructions Manual

Page: 121 / 216

ABT-BA-e-1312 49
13.2 Standstill display
If the display shows the stability display ( ) the balance is in a stable status. The
condition for judging stability is user-selectable. There are three levels to select: 1
count, 5 counts and 10 counts. The default setting is 1 count.
The setting of the standstill display can be checked on the setting control display
(see ch.12.6).
Setting the standstill display
Repeatedly press the
[CAL]
key until "FUnC.SEL" appears.
Press
[TARE]
key
(Example)
Repeatedly press the
[CAL]
key until the current "b And:**" set-
ting appears.
Press
[TARE]
key

You can use the
[CAL]
key to select between the following set-
tings:
"b-1"
1 count
"b-1"
5 count
"b-1"
10 count
The current setting is marked by the stability symbol ( ).
Confirm your selection by pressing the
[TARE]
key
To exit the function, press the
[ON/OFF]
key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.