466-BA-defsi-0016
12
3.3 Plus/Minus
Weighings
For instance to control
piece-weights
.
Switch the balance on by pressing the
ON/M
key, then wait until “
0
” is indicated.
Place rated weight on the weighing plate and tare on “
0
” by
TARE
key. Remove the
rated weight.
Place the objects on the weighing pan successively, the balance will show any
deviation from the rated weight in “
+
” and “
-
“.
According to the same procedure packages with the same weight, related to a rated
weight, can be produced.
Return to the weighing mode by pressing the
TARE
key.
3.4 Piece
counting
Briefly press the
CAL/MODE
key.
The reference number
5
will appear.
To call up the reference numbers
10, 25 and 50
press the
CAL/MODE
key several
times.
Put as many pieces on the weighing pan as the set reference number requires.
Confirm by pressing the
TARE
key..
The balance is now in the piece counting mode and will count all pieces laying on the
weighing pan.
By pressing the
CAL/MODE
key the balance returns to the weighing mode and
displays the weight of the counted pieces.
Important: The higher the reference number, the more accurate the piece
counting is.
See the table “Technical Information” for minimum counting weight. If the number of
pieces is below the minimum weight the display shows “
Er1
”. Return to the weighing
mode by pressing the
CAL/MODE
key.
Tare cups can also be used to count pieces. Tare the tare cup by pressing the
TARE
key before beginning the piece counting.
